A tank or trough for the reception of raw milk permits discharge of the milk manually, in milk churns, or by means of cistern trucks. It has a maximum capacity of 5.000 litres/hour.
The maximum temperature foreseen for the milk on arrival is 25º C.
ED-5 Reception of Raw Milk
ED-5 Reception of Raw Milk
Anmod om information
ED-5 Reception of Raw Milk
Anmod om information
ED-5 Reception of Raw Milk
Funktion
The raw milk is poured onto a pre-filter in order to eliminate the largest of any solid particles. The milk is stored in a tank specially designed for this purpose which has a capacity of 150 litres. This deposit tank has probes installed to detect both maximum and minimum levels. When the minimum level is detected the machine will start working. Another filter situated in the lower part of the unit undertakes a second elimination of solid particles, this time finer ones.
The pump propels the milk through the plate heat exchanger which cools the fluid from 35º C (max.) to 4º C.
Before the cooling process the flow of milk is recorded by an electro-magnetic flowmeter which allows us to know the exact quantity supplied by each farmer, or total amounts on a daily, weekly or monthly basis, etc.
Design og karakteristika
Milk reception module with filter.
Mounted on a stainless steel AISI 304 framework.
Reception tank 150 litres.
Primary filter made of perforated mesh for reception in milk churns.
Second straight filter with 0,5 mm fine mesh in stainless steel AISI 316L DN40 with EPDM gasket.
Sanitary centrifuge pump Hyginox, 3.000 r.p.m., 0,55 kW to propel product.
Butterfly valve DN40 in stainless steel AISI 316L with EPDM gasket and multi-position handle.
Level sensor probes.
Electro-magnetic flowmeter DN25.
Plate Interchanger in stainless steel AISI 316L with NBR gaskets.
Control cabinet built in stainless steel AISI 304. Includes: temperature regulator, pump control and power-trip, push-buttons and operating indicator lights.
Equipment pre-assembled and tested in our IINOXPA headquarters.
Materialer
Parts in contact with the product AISI 316L and AISI 304
Rest of materials and control cabinet AISI 304
Gaskets in contact with the product EPDM and NBR
Interior surface finish (product contact) Ra ≤ 0.8 μm
Other exterior finishes Matte polished
Muligheder
Plate Interchanger calculation individually according to specific arrival temperature (25º - 35º C).
Possibility to be connected to central CIP cleaning system.
Pressure gauge to detect blockage of secondary filter.
Dokumenter
Data sheet (5)
Funktion
The raw milk is poured onto a pre-filter in order to eliminate the largest of any solid particles. The milk is stored in a tank specially designed for this purpose which has a capacity of 150 litres. This deposit tank has probes installed to detect both maximum and minimum levels. When the minimum level is detected the machine will start working. Another filter situated in the lower part of the unit undertakes a second elimination of solid particles, this time finer ones.
The pump propels the milk through the plate heat exchanger which cools the fluid from 35º C (max.) to 4º C.
Before the cooling process the flow of milk is recorded by an electro-magnetic flowmeter which allows us to know the exact quantity supplied by each farmer, or total amounts on a daily, weekly or monthly basis, etc.
Materialer and Muligheder
Parts in contact with the product AISI 316L and AISI 304
Rest of materials and control cabinet AISI 304
Gaskets in contact with the product EPDM and NBR
Interior surface finish (product contact) Ra ≤ 0.8 μm
Other exterior finishes Matte polished
Plate Interchanger calculation individually according to specific arrival temperature (25º - 35º C).
Possibility to be connected to central CIP cleaning system.
Pressure gauge to detect blockage of secondary filter.
Dokumenter
| Dokumentnummer. | FTsolED-5.1_ES |
| Titel | Unidad para la Recepción de Leche Cruda ED-5 |
| Filtype | |
| Resumé | Una artesa de recepción permite la llegada de la leche de forma manual en cántaras o camiones cisternas. |
|
|
| Dokumentnummer. | FTsolED-5.1_EN |
| Titel | Unit for the Reception of Raw Milk ED-5 |
| Filtype | |
| Resumé | A tank or trough for the reception of raw milk permits discharge of the milk manually, in milk churns, or by means of cistern trucks |
|
|
| Dokumentnummer. | FTsolED-5.1_FR |
| Titel | Unité de Collecte du Lait Cru ED-5 |
| Filtype | |
| Resumé | Un bac de collecte permet l'arrivée du lait manuellement dans des bidons ou des camions citernes. |
|
|
| Dokumentnummer. | FTsolED-5.1_IT |
| Titel | Unità per la Ricezione di Latte Crudo ED-5 |
| Filtype | |
| Resumé | Un serbatoio di ricezione consente lo scarico manuale del latte in appositi bidoni o autocisterne. |
|
|
| Dokumentnummer. | FTsolED-5.1_RU |
| Titel | Модуль Приемки Сырого Молока ED-5 |
| Filtype | |
| Resumé | Модуль приемки молока предназначен для приемки сырого молока от поставщиков |
|
|
Beslægtede produkter
