INOXPA SKANDINAVIEN A/S

Langballe 2, DK – 8700

Horsens, Denmark

MBC Double Cone Blender

MBC Double Cone Blender

Anmod om information

MBC Double Cone Blender

The double cone blender is used to produce homogeneous solid-solid mixture. Mixing is a common process step in the manufacture of products for industries such as food, cosmetics, pharmaceutical, chemical, detergents, fertilizers and plastics.

Examples of materials or substances mixed in this way include pharmaceutical granules, semolina flour, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations to make dehydrated soups and creams, leaf waxes, detergent granules, soap flakes, artificial fertilizers, plastic in powder, ground or pellet form, fibreglass, etc.

Anmod om information

MBC Double Cone Blender

Funktion

The main body of the blender consists of two cone-shaped sections welded at their bases to a central cylindrical section. The axis of rotation is perpendicular to the cone axis and passes through the cylindrical section. The driving motor is located at one of the two lateral supports holding the blender body.

The solids are introduced into the blender through the loading aperture. In this type of blender, mixing takes place axially, as a result of the powder moving through the different sections. Mixing is thorough but it depends on the rotating speed.

The mixture is discharged through a hermetically closing butterfly valve which can be operated manually or automatically.
The unit is provided with a guard rail with electrical safety to prevent the operator from accessing it when in operation. If anyone should gain access to the unit, for safety reasons, the operation will cease.

Design og karakteristika

The series consists of 6 models with a total capacity of 160 to 4200 litres and a useful capacity of 65% of the total.
This blender is especially designed for sensitive mixtures with risk of breakage where the generation of dusts is to be avoided. Mixing times vary between 5 and 20 minutes depending on the mixture.
There are two apertures: the loading and cleaning aperture, and the discharge opening, which incorporates a butterfly valve thatcan be operated automatically or manually.
The apertures are sealed hermetically in order to avoid contamination from the outside during the mixing process.
The interior of the blender incorporates a cone mounted on the pivot axis on both sides. This system eliminates the formation of dead spaces and facilitates gravity discharge.

The unit is manufactured in AISI 316 (EN 14404) quality for all parts in contact with the product and AISI 304 (EN 14301) for the supports and the rest of the equipment. The internal and external surfaces have a bright polished finish.
Due to the polished surface and absence of edges or corners, the unit can be easily cleaned either manually or automatically with CIP system.
The unit incorporates a guard rail with electrical safety, according to EC safety standards.
The motors and electrical panels are available in standard or ATEX protection.
It allows the addition of liquid additives depending on the product to be mixed. Normally, these liquids are added in spray form in order to affect the largest number of particles in the mixture, thereby increasing efficiency.
The system offers a clear added value. The unit’s large production capacity, the high quality of the resulting mixture, and the low energy and maintenance costs directly contribute to an increase in profitability.
On request, the loading and discharge systems can be automated with a butterfly valve with pneumatic dosing system.
This equipment has been designed -in contrast to the “V”-type blender- to handle mixtures of granulated products and powders, or mixtures of products with high and different densities, with a loading of 65% of the total capacity of the equipment, unlike the 50% loading in a “V”-type blender, which handles mixtures of powders with the same bulk density.

Materialer

Parts in contact with the product AISI 316 (EN 14404)
Structure and other metal parts AISI 304 (EN 14301)
Internal finish Bright polish
External finish Bright polish

Muligheder

This unit allows the incorporation of a liquid spray system to introduce liquids in spray form during the process. The injector is connected to the spray nozzles by means of a rotary system and is fed with additives from a pressurized tank or by means of a variable displacement pump at constant pressure.
The automatic stop positions are: loading, discharging, and sampling. Before stopping at one of these three positions, the system performs a cycle which slows down the mixer in order to reach the stopping position with the highest possible accuracy and remains halted at that point.
The unit can be equipped with an automated loading system for introducing powders and granules into the blender body by means of a vacuum unit with self-cleaning hoses. It prevents creation of dust.
The skid can also be provided with a complete monoblock vacuum unit with liquid ring pump.
It is possible to install an automated vacuum discharge system. It includes a product receiving hopper with an automated
self-cleaning filter; as well as a control panel for the unit.
The loading/discharge can be carried out with pneumatically actuated retractable hermetic bellows. This system and the vacuum loading/discharge can be combined.

Dokumenter

Funktion

The main body of the blender consists of two cone-shaped sections welded at their bases to a central cylindrical section. The axis of rotation is perpendicular to the cone axis and passes through the cylindrical section. The driving motor is located at one of the two lateral supports holding the blender body.

The solids are introduced into the blender through the loading aperture. In this type of blender, mixing takes place axially, as a result of the powder moving through the different sections. Mixing is thorough but it depends on the rotating speed.

The mixture is discharged through a hermetically closing butterfly valve which can be operated manually or automatically.
The unit is provided with a guard rail with electrical safety to prevent the operator from accessing it when in operation. If anyone should gain access to the unit, for safety reasons, the operation will cease.

Materialer and Muligheder

Parts in contact with the product AISI 316 (EN 14404)
Structure and other metal parts AISI 304 (EN 14301)
Internal finish Bright polish
External finish Bright polish

This unit allows the incorporation of a liquid spray system to introduce liquids in spray form during the process. The injector is connected to the spray nozzles by means of a rotary system and is fed with additives from a pressurized tank or by means of a variable displacement pump at constant pressure.
The automatic stop positions are: loading, discharging, and sampling. Before stopping at one of these three positions, the system performs a cycle which slows down the mixer in order to reach the stopping position with the highest possible accuracy and remains halted at that point.
The unit can be equipped with an automated loading system for introducing powders and granules into the blender body by means of a vacuum unit with self-cleaning hoses. It prevents creation of dust.
The skid can also be provided with a complete monoblock vacuum unit with liquid ring pump.
It is possible to install an automated vacuum discharge system. It includes a product receiving hopper with an automated
self-cleaning filter; as well as a control panel for the unit.
The loading/discharge can be carried out with pneumatically actuated retractable hermetic bellows. This system and the vacuum loading/discharge can be combined.

Dokumentnummer. FTsolMBC_ES
Titel Mezclador Tipo Bicónico MBC
Filtype .pdf
    Download
  • E-mail
Dokumentnummer. FTsolMBC_EN
Titel Double Cone Solids Blender MBC
Filtype .pdf
    Download
  • E-mail
Dokumentnummer. FTsolMBC_IT
Titel Mescolatore Tipo Biconico MBC
Filtype .pdf
    Download
  • E-mail
Dokumentnummer. FTsolMBC_PT
Titel Misturador de Tipo Bicónico MBC
Filtype .pdf
    Download
  • E-mail
Dokumentnummer. FTsolMBC_RU
Titel Блендер Двухконусного Типа MBC
Filtype .pdf
    Download
  • E-mail
Dokumentnummer. FA.MBC.1_ES
Titel MBC: Mezcla de productos en polvo
Filtype .pdf
Resumé El proceso de mezcla de dos o más productos sólidos, con o sin adición de líquidos, se puede realizar en tres equipos diferentes en función de su granulometría y el proceso de fabricación.
    Download
  • E-mail
Dokumentnummer. FA.MBC.1_EN
Titel MBC: Mixing of Products in Powder Form
Filtype .pdf
Resumé The process of mixing two or more solid products, with or without addition of liquids, can be performed in three different skids depending on their grain size and the manufacturing process
    Download
  • E-mail

Cookiepolitik

Denne hjemmeside bruger cookies. Vi bruger cookies til at tilpasse vores indhold og annoncer, til at vise dig funktioner til sociale medier og til at analysere vores trafik. Vi deler også oplysninger om din brug af vores hjemmeside med vores partnere inden for sociale medier, annonceringspartnere og analysepartnere. Vores partnere kan kombinere disse data med andre oplysninger, du har givet dem, eller som de har indsamlet fra din brug af deres tjenester. Side med politik om cookies.

Tillad alle cookies
Tillad valgte
Nødvendig (2)
Præferencer (0)
Statistik (7)
Marketing (11)
Om cookies

Nødvendige cookies hjælper med at gøre en hjemmeside brugbar ved at aktivere grundlæggende funktioner såsom side-navigation og adgang til sikre områder af hjemmesiden. Hjemmesiden kan ikke fungere ordentligt uden disse cookies.

Præference cookies gør det muligt for en hjemmeside at huske oplysninger, der ændrer den måde hjemmesiden ser ud eller opfører sig på. F.eks. dit foretrukne sprog, eller den region, du befinder dig i.

Statistiske cookies giver hjemmesideejere indsigt i brugernes interaktion med hjemmesiden, ved at indsamle og rapportere oplysninger anonymt.

Marketing cookies bruges til at spore brugere på tværs af websites. Hensigten er at vise annoncer, der er relevante og engagerende for den enkelte bruger, og dermed mere værdifulde for udgivere og tredjeparts-annoncører.

Navn Udbyder Formål Udløb Type
cc_cookie_accept www.inoxpa.dk Gemmer brugerens cookie-samtykke-tilstand for det aktuelle domæne. 1 dag HTTP
PHPSESSID www.inoxpa.dk Bevarer brugersessionstilstand på tværs af sideanmodninger. Session HTTP
collect Google Used to send data to Google Analytics about the visitor's device and behavior. Tracks the visitor across devices and marketing channels. Session Pixel
_ga Google Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 2 år HTTP
_ga_# www.inoxpa.dk Anvendes af Google Analytics til at indsamle data om antallet af gange en bruger har besøgt hjemmesiden samt datoer for første og seneste besøg. 2 år HTTP
_gat_ Google Anvendes af Google Analytics til at drosle hastigheden på antallet af forespørgsler til serveren 1 dag HTTP
_gid Google Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 1 dag HTTP
fr Facebook Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 3 måneder HTTP
_fbp Facebook Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 3 måneder HTTP
IDE Google Anvendes af Google DoubleClick til at registrere og rapportere om hjemmesidebrugerens handlinger efter at have set eller klikket på en af annoncørens annoncer. Formålet er at måle effekten af en annonce samt at målrette annoncer til brugeren. 1 dag HTTP
ads/ga-audiences Google Anvendes af Google AdWords til at gentage annoncer for besøgende, der sandsynligvis vil konvertere til kunder baseret på den besøgendes onlineadfærd på tværs af websteder. Session Pixel
VISITOR_INFO1_LIVE YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video 179 dage HTTP
YSC YouTube Registrerer et unikt ID for at føre statistik over hvilke videoer fra YouTube brugeren har set. Session HTTP
yt-remote-cast-installed YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-connected-devices YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Vedholdende HTML
yt-remote-device-id YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Vedholdende HTML
yt-remote-fast-check-period YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-session-app YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-session-app YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-session-name YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
Cookies er små tekstfiler, der kan bruges af websteder for at gøre brugerens oplevelse mere effektiv. Loven siger, at vi kan gemme cookies på din enhed, hvis de er strengt nødvendige for driften af ​​dette websted. For alle andre typer cookies har vi brug for din tilladelse. Dette websted bruger forskellige typer cookies. Nogle cookies placeres af tredjepartstjenester, der vises på vores sider. Du kan når som helst ændre eller trække dit samtykke fra cookiedeklarationen på vores websted. Lær mere om, hvem vi er, hvordan du kan kontakte os, og hvordan vi behandler personoplysninger i vores fortrolighedspolitik. Angiv dit samtykke-id og dato, når du kontakter os angående dit samtykke.