The INNOVA type J valve is a pneumatic single seat valve designed for use as overflow valve in hygienic installations.
Its most important applications involve operating as a by-pass valve for positive displacement pumps or protecting equipment against excessive pressure.
Adjusting the screw on the upper part sets the spring pressure, which sets the valve’s closing pressure.
The valve opens when the set pressure is exceeded.
The valve comes with an actuator that enables liquid to flow during CIP cleaning processes.
INNOVA J Overflow Single Seat Valve
INNOVA J Overflow Single Seat Valve
Anmod om information
INNOVA J Overflow Single Seat Valve
Anmod om information
INNOVA J Overflow Single Seat Valve
Design og karakteristika
Pressure range: from 0,5 to 6 bar.
Easy assembly/disassembly of internal parts by loosening a clamp fastener.
Open lantern allows visual inspection of shaft sealing.
360º adjustable body.
Materialer
Parts in contact with the product AISI 316L (1.4404)
Other stainless steel parts AISI 304 (1.4301)
Gasket EPDM
Surface finish:
Internal Bright polish Ra ≤ 0,8 μm
External Matt
Muligheder
Gaskets: HNBR or FPM.
Other connection types.
Opening pressure range: from 6 to 10 bar
for sizes DN 25, 40 and 50.
External position sensors.
Internal surface finish: Ra ≤ 0,5 μm.
Jacketed body.
Steam barrier.
Dokumenter
Data sheet (6)
Quick installation guide (1)
Instruction manual (6)
Funktion
Materialer and Muligheder
Parts in contact with the product AISI 316L (1.4404)
Other stainless steel parts AISI 304 (1.4301)
Gasket EPDM
Surface finish:
Internal Bright polish Ra ≤ 0,8 μm
External Matt
Gaskets: HNBR or FPM.
Other connection types.
Opening pressure range: from 6 to 10 bar
for sizes DN 25, 40 and 50.
External position sensors.
Internal surface finish: Ra ≤ 0,5 μm.
Jacketed body.
Steam barrier.
Dokumenter
| Dokumentnummer. | 10.245.33.01ES |
| Titel | Válvula de Simple Asiento de Alivio INNOVA J |
| Filtype | |
|
|
| Dokumentnummer. | 10.245.33.01EN |
| Titel | Overflow Single Seat Valve INNOVA J |
| Filtype | |
|
|
| Dokumentnummer. | 10.245.33.01FR |
| Titel | Vanne à Simple Siège de Surpression INNOVA J |
| Filtype | |
|
|
| Dokumentnummer. | 10.245.33.01IT |
| Titel | Valvola di Sicurezza a Singola Sede INNOVA J |
| Filtype | |
|
|
| Dokumentnummer. | 10.245.33.01DE |
| Titel | Überlauf-Einsitzventil INNOVA J |
| Filtype | |
|
|
| Dokumentnummer. | 10.245.33.01RU |
| Titel | Перепускной Односедельный Клапан INNOVA J |
| Filtype | |
|
|
| Dokumentnummer. | 10.245.30.04MU |
| Titel | Guía rápida de instalación - Quick installation guide - Guide d’installation rapide - Краткое руководство по монтажу INNOVA J |
| Filtype | |
|
|
| Dokumentnummer. | 10.245.30.03ES_revA |
| Titel | INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO VÁLVULA de ALIVIO de SIMPLE ASIENTO INNOVA J |
| Filtype | |
| Resumé | La válvula INNOVA J es una válvula de simple asiento y accionamiento neumático. La presión del cierre de la válvula viene dada por la presión del muelle, que puede variarse mediante la regulación del tornillo situado en la parte superior |
|
|
| Dokumentnummer. | 10.245.30.07EN |
| Titel | INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO VÁLVULA de ALIVIO de SIMPLE ASIENTO INNOVA J - ANEXO ATEX |
| Filtype | |
|
|
| Dokumentnummer. | 10.245.30.03EN_revA |
| Titel | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS SINGLE SEAT RELIEF VALVE INNOVA J |
| Filtype | |
| Resumé | INNOVA J (relief) valve is pneumatically actuated single-seat valve .Closing pressure of the valve is set by the spring pressure, which can be regulated by means of the screw located on the top of the valve. When the set pressure exceeds, valve opens. |
|
|
| Dokumentnummer. | 10.245.30.07EN |
| Titel | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS SINGLE SEAT RELIEF VALVE INNOVA J - ANNEX ATEX |
| Filtype | |
|
|
| Dokumentnummer. | 10.245.30.03FR_revA |
| Titel | INSTRUCTIONS RELATIVES À L’INSTALLATION, À LA MISE EN SERVICE ET À LA MAINTENANCE VANNE À CLAPET SIMPLE SIÈGE INNOVA J |
| Filtype | |
| Resumé | La vanne INNOVA J est une vanne simple siège à commande pneumatique. La pression de fermeture de la vanne est donnée par la pression du ressort qui peut être modifiée en ajustant la vis située sur la partie supérieure. Dès lors que cette pression de réglage est dépassée, la vanne s’ouvre |
|
|
| Dokumentnummer. | 10.245.30.07FR |
| Titel | INSTRUCTIONS RELATIVES À L’INSTALLATION, À LA MISE EN SERVICE ET À LA MAINTENANCE VANNE À CLAPET SIMPLE SIÈGE INNOVA J - ANNEXE ATEX |
| Filtype | |
|
|
Beslægtede produkter
