INOXPA SKANDINAVIEN A/S

Langballe 2, DK – 8700

Horsens, Denmark

HTST Pasteuriseringsapparat

HTST Pasteuriseringsapparat

Anmod om information

HTST Pasteuriseringsapparat

The pasteurisation unit (HTST pasteuriser) is designed for the thermal treatment of milk and dairy products as well as other food products as soft drinks and juices. The process destroys pathogenic microorganisms by heating the product to a moderately high temperature for a brief period.

Anmod om information

HTST Pasteuriseringsapparat

Funktion

The product arrives to a balance tank (BTD) and is pumped to a plate heat exchanger. It is heated to a pasteurising temperature, that depends on the type of food product and/or process requirements. Next, the product passes through the holding tube that ensures the correct pasteurisation by holding the product at the required temperature for the specified period of time. 
If the heat exchanger has a regeneration stage, the treated product is used to preheat the feed material, losing heat in the process, this, reducing the energy required to reach the pasteurising temperature and in reducing the cooling required.
Finally, the product is cooled to 4 ºC for cold filling or storage in isothermal tanks.
If, due to any problem, the pasteurising temperature is lower than the required one, an automatically operated flow divert valve sends the product back to the balance tank (BTD), thus, preventing any microbial contamination of the final product.

Design og karakteristika

Components of the compact unit:
- Balance tank: 100 L, AISI 304. 
- Feeding pump: Hyginox SE centrifugal pump. 
- Plate heat exchanger: 1, 2 or 3 stages, upon request or depending on the process; stainless steel frame, AISI 316L staineless steel plates (0,6 mm thick); mecanically fixed NBR gaskets.
- The holding tube is slightly tilted to promote the drainage of the pump. 
- KH automatically operated flow divert valve (3 ways), manual butterfly valves and the instrumentation necessary to control the pasteurising temperature. 
- 3 way modulating valve for hot water with electropneumatic positioner. 
- Stainless steel frame with height adjustable legs.
- For the operation of the unit, there is an AISI 304 stainless steel control panel. The panel includes a temperature regulator.

The basic configuration set includes a REED type max/min level sensor in the BTD and a PT100 temperature sensor with 4-20 mA output and an adjustable 0 - 100 ºC thermometer at the outlet.

If required, the unit must be provided with glycol water for cooling and with hot water or industrial steam at 3 bar.

Materialer

Parts in contact with the product: AISI 304
Other components and control panel: AISI 304
Pump mechanical seal: C/SiC/EPDM
Gaskets in contact with the product: EPDM and NBR
Surface finish: Ra ≤ 0.8 µm

Muligheder

- Hot water generation circuit: hot water is supplied by a circuit of water heated while recirculated through a plate heat exchanger heated by steam. 
- Frequency converter, in the control panel, for the centrifugal pump.
- Flow control: an electromagnetic flowmeter and a frequency converter for the discharge pump. 
- Cold water control includes 3 way valve, PT100 temperature sensor and a temperature regulator.
- Pasteurisation temperature and/or flow control is recorded to ensure safe production. Paper o video recorder.
- Special plates for the thermal treatment of products with pulp or solid particles in suspension.
- 4 stage heat exchanger for homogenisers, cream separators, etc. 
- Other temperature and holding time modes.

Dokumenter

Funktion

The product arrives to a balance tank (BTD) and is pumped to a plate heat exchanger. It is heated to a pasteurising temperature, that depends on the type of food product and/or process requirements. Next, the product passes through the holding tube that ensures the correct pasteurisation by holding the product at the required temperature for the specified period of time. 
If the heat exchanger has a regeneration stage, the treated product is used to preheat the feed material, losing heat in the process, this, reducing the energy required to reach the pasteurising temperature and in reducing the cooling required.
Finally, the product is cooled to 4 ºC for cold filling or storage in isothermal tanks.
If, due to any problem, the pasteurising temperature is lower than the required one, an automatically operated flow divert valve sends the product back to the balance tank (BTD), thus, preventing any microbial contamination of the final product.

Materialer and Muligheder

Parts in contact with the product: AISI 304
Other components and control panel: AISI 304
Pump mechanical seal: C/SiC/EPDM
Gaskets in contact with the product: EPDM and NBR
Surface finish: Ra ≤ 0.8 µm

- Hot water generation circuit: hot water is supplied by a circuit of water heated while recirculated through a plate heat exchanger heated by steam. 
- Frequency converter, in the control panel, for the centrifugal pump.
- Flow control: an electromagnetic flowmeter and a frequency converter for the discharge pump. 
- Cold water control includes 3 way valve, PT100 temperature sensor and a temperature regulator.
- Pasteurisation temperature and/or flow control is recorded to ensure safe production. Paper o video recorder.
- Special plates for the thermal treatment of products with pulp or solid particles in suspension.
- 4 stage heat exchanger for homogenisers, cream separators, etc. 
- Other temperature and holding time modes.

Titel FTsolHTST.2_ES.pdf
    Download
  • E-mail
Titel FTsolHTST.2_EN.pdf
    Download
  • E-mail
Titel FTsolHTST.2_RU.pdf
    Download
  • E-mail
Titel FTsolHTST.2_FR.pdf
    Download
  • E-mail

Cookiepolitik

Denne hjemmeside bruger cookies. Vi bruger cookies til at tilpasse vores indhold og annoncer, til at vise dig funktioner til sociale medier og til at analysere vores trafik. Vi deler også oplysninger om din brug af vores hjemmeside med vores partnere inden for sociale medier, annonceringspartnere og analysepartnere. Vores partnere kan kombinere disse data med andre oplysninger, du har givet dem, eller som de har indsamlet fra din brug af deres tjenester. Side med politik om cookies.

Tillad alle cookies
Tillad valgte
Nødvendig (2)
Præferencer (0)
Statistik (7)
Marketing (11)
Om cookies

Nødvendige cookies hjælper med at gøre en hjemmeside brugbar ved at aktivere grundlæggende funktioner såsom side-navigation og adgang til sikre områder af hjemmesiden. Hjemmesiden kan ikke fungere ordentligt uden disse cookies.

Præference cookies gør det muligt for en hjemmeside at huske oplysninger, der ændrer den måde hjemmesiden ser ud eller opfører sig på. F.eks. dit foretrukne sprog, eller den region, du befinder dig i.

Statistiske cookies giver hjemmesideejere indsigt i brugernes interaktion med hjemmesiden, ved at indsamle og rapportere oplysninger anonymt.

Marketing cookies bruges til at spore brugere på tværs af websites. Hensigten er at vise annoncer, der er relevante og engagerende for den enkelte bruger, og dermed mere værdifulde for udgivere og tredjeparts-annoncører.

Navn Udbyder Formål Udløb Type
cc_cookie_accept www.inoxpa.dk Gemmer brugerens cookie-samtykke-tilstand for det aktuelle domæne. 1 dag HTTP
PHPSESSID www.inoxpa.dk Bevarer brugersessionstilstand på tværs af sideanmodninger. Session HTTP
collect Google Used to send data to Google Analytics about the visitor's device and behavior. Tracks the visitor across devices and marketing channels. Session Pixel
_ga Google Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 2 år HTTP
_ga_# www.inoxpa.dk Anvendes af Google Analytics til at indsamle data om antallet af gange en bruger har besøgt hjemmesiden samt datoer for første og seneste besøg. 2 år HTTP
_gat_ Google Anvendes af Google Analytics til at drosle hastigheden på antallet af forespørgsler til serveren 1 dag HTTP
_gid Google Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 1 dag HTTP
fr Facebook Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 3 måneder HTTP
_fbp Facebook Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 3 måneder HTTP
IDE Google Anvendes af Google DoubleClick til at registrere og rapportere om hjemmesidebrugerens handlinger efter at have set eller klikket på en af annoncørens annoncer. Formålet er at måle effekten af en annonce samt at målrette annoncer til brugeren. 1 dag HTTP
ads/ga-audiences Google Anvendes af Google AdWords til at gentage annoncer for besøgende, der sandsynligvis vil konvertere til kunder baseret på den besøgendes onlineadfærd på tværs af websteder. Session Pixel
VISITOR_INFO1_LIVE YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video 179 dage HTTP
YSC YouTube Registrerer et unikt ID for at føre statistik over hvilke videoer fra YouTube brugeren har set. Session HTTP
yt-remote-cast-installed YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-connected-devices YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Vedholdende HTML
yt-remote-device-id YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Vedholdende HTML
yt-remote-fast-check-period YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-session-app YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-session-app YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-session-name YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
Cookies er små tekstfiler, der kan bruges af websteder for at gøre brugerens oplevelse mere effektiv. Loven siger, at vi kan gemme cookies på din enhed, hvis de er strengt nødvendige for driften af ​​dette websted. For alle andre typer cookies har vi brug for din tilladelse. Dette websted bruger forskellige typer cookies. Nogle cookies placeres af tredjepartstjenester, der vises på vores sider. Du kan når som helst ændre eller trække dit samtykke fra cookiedeklarationen på vores websted. Lær mere om, hvem vi er, hvordan du kan kontakte os, og hvordan vi behandler personoplysninger i vores fortrolighedspolitik. Angiv dit samtykke-id og dato, når du kontakter os angående dit samtykke.