INOXPA SKANDINAVIEN A/S

Langballe 2, DK – 8700

Horsens, Denmark

MCR Counter-Rotating Blenders

Anmod om information

MCR Counter-Rotating Blenders

Counter-rotating blenders are used for mixing and homogenizing dispersed products at a controlled temperature with an optimum performance, regardless of the product viscosity.
These units are intended primarily for pharmaceutical, cosmetics, food and personal care products industries.
They are ideal for processes which require heating, vacuum, premixing, additions, vigorous agitation, emulsion or dispersion, as well as pressure and temperature. The skid can work at -1 to 0.5 bar and the double jacket - up to 3 bar. The operating temperature is between -7 a 120 ºC.
It is possible to control the following parameters: temperature, pressure, pH, weight and viscosity.
The unit is provided with a cleaning system with rotating spray balls in order to be connected to a CIP and SIP cleaning system.
Some examples of products that can be treated with these units are all kinds of creams, gels, sunscreens, depilatories, makeup, deodorants, sauces, pates, pastes, shoe creams, emulsions, paraffin mixtures, wax mixtures, carbopol dispersions, tooth pastes, products intended for drugstores and parapharmacies.

Anmod om information

MCR Counter-Rotating Blenders

Funktion

The unit has a sealed tank where mixing takes place by means of an anchor type agitator, a central shaft with counter-rotating blades that move in the opposite direction to the anchor, and an emulsifying disperser located at the bottom of the shaft.
The unit normally operates under vacuum during the entire duration of the mixing process. When the agitation starts, the anchor and the central blades rotate slowly while the bottom mixer is put into operation.
Subsequently, the product to be dispersed or emulsified is added and the speed of the blades on the central shaft is increased.
When the mixing is complete, the agitator speed decreases and the bottom mixer is stopped; at the same time the chamber begins to cool down. When the product reaches the desired temperature, any required additives are added to the mixture, typically when cold; depending on the process, the speed of the agitators may be increased slightly. It is possible to recirculate the product and, if necessary, an emulsifier can be added to the process.
The product discharge system can be by gravity or with a pump and, if necessary, using positive pressure.
Finally, the tank is cleaned by the CIP system.

Design og karakteristika

These units are available in 3 arrangements: on support base, on support feet and a metal structure, or on concrete floor, with or without automatic lid lifting. The units with support bases are designed to accept all auxiliary equipment necessary for the unit to operate autonomously.
These units are built to FDA standards.
For good temperature control, the system includes a PT100 or 4-20 mA temperature probe located on one end of the central shaft of the agitator in order to obtain product temperature data. Its reliability is excellent because of its distance from the boiler walls in contact with the hot and cold chamber. It has a second probe located in the heating and cooling chamber to control the latter.

Materialer

Parts in contact with the product AISI 316 (EN 14404)
Other stainless steel parts AISI 304 (EN 14301)
Interior surface finish bright polish, Ra ≤ 0.8 μm
Exterior surface finish bright polish, Ra ≤ 0.8 μm

Muligheder

Weighing system.
Cleaning system.
Support system and lid lifting system.

Dokumenter

Funktion

The unit has a sealed tank where mixing takes place by means of an anchor type agitator, a central shaft with counter-rotating blades that move in the opposite direction to the anchor, and an emulsifying disperser located at the bottom of the shaft.
The unit normally operates under vacuum during the entire duration of the mixing process. When the agitation starts, the anchor and the central blades rotate slowly while the bottom mixer is put into operation.
Subsequently, the product to be dispersed or emulsified is added and the speed of the blades on the central shaft is increased.
When the mixing is complete, the agitator speed decreases and the bottom mixer is stopped; at the same time the chamber begins to cool down. When the product reaches the desired temperature, any required additives are added to the mixture, typically when cold; depending on the process, the speed of the agitators may be increased slightly. It is possible to recirculate the product and, if necessary, an emulsifier can be added to the process.
The product discharge system can be by gravity or with a pump and, if necessary, using positive pressure.
Finally, the tank is cleaned by the CIP system.

Materialer and Muligheder

Parts in contact with the product AISI 316 (EN 14404)
Other stainless steel parts AISI 304 (EN 14301)
Interior surface finish bright polish, Ra ≤ 0.8 μm
Exterior surface finish bright polish, Ra ≤ 0.8 μm

Weighing system.
Cleaning system.
Support system and lid lifting system.

Dokumentnummer. FTsolMCR.1_FR
Titel Mélangeur à Contre Rotatif MCR
Filtype .pdf
Resumé Les mélangeurs à contre rotatif sont utilisés pour le mélange des produits à des fins de dispersion et d'homogénéisation à température contrôlée. Ils offrent un rendement optimal quelle que soit la viscosité du produit.
    Download
  • E-mail
Dokumentnummer. FTsolMCR.1_ES
Titel Mezclador a Contra Rotación MCR
Filtype .pdf
Resumé Los mezcladores a contra rotación se utilizan para la mezcla de productos en dispersión y homogeneización a temperatura controlada, obteniendo un óptimo rendimiento, independientemente de la viscosidad del producto.
    Download
  • E-mail
Dokumentnummer. FTsolMCR.1_EN
Titel Counter-Rotating Blenders MCR
Filtype .pdf
Resumé Counter-rotating blenders are used for mixing and homogenizing dispersed products at a controlled temperature with an optimum performance, regardless of the product viscosity.
    Download
  • E-mail
Dokumentnummer. FTsolMCR.1_IT
Titel Miscelatori con Controrotazione MCR
Filtype .pdf
Resumé I miscelatori con controrotazione si utilizzano per la miscelazione dei prodotti in dispersione ed omogenizzazione a teperatura controllata, ottenendo un elevato rendimento, indipendentemente dalla viscosità del prodotto
    Download
  • E-mail
Dokumentnummer. MCR - Cuestionario
Titel MCR - Cuestionario
Filtype .docx
Resumé Recogida de datos para mezclador a contra rotación
    Download
  • E-mail
Dokumentnummer. MCR - Questionnaire
Titel MCR - Questionnaire
Filtype .docx
Resumé Information required for selection of a blender with counter-rotating agitator
    Download
  • E-mail

Cookiepolitik

Denne hjemmeside bruger cookies. Vi bruger cookies til at tilpasse vores indhold og annoncer, til at vise dig funktioner til sociale medier og til at analysere vores trafik. Vi deler også oplysninger om din brug af vores hjemmeside med vores partnere inden for sociale medier, annonceringspartnere og analysepartnere. Vores partnere kan kombinere disse data med andre oplysninger, du har givet dem, eller som de har indsamlet fra din brug af deres tjenester. Side med politik om cookies.

Tillad alle cookies
Tillad valgte
Nødvendig (2)
Præferencer (0)
Statistik (7)
Marketing (11)
Om cookies

Nødvendige cookies hjælper med at gøre en hjemmeside brugbar ved at aktivere grundlæggende funktioner såsom side-navigation og adgang til sikre områder af hjemmesiden. Hjemmesiden kan ikke fungere ordentligt uden disse cookies.

Præference cookies gør det muligt for en hjemmeside at huske oplysninger, der ændrer den måde hjemmesiden ser ud eller opfører sig på. F.eks. dit foretrukne sprog, eller den region, du befinder dig i.

Statistiske cookies giver hjemmesideejere indsigt i brugernes interaktion med hjemmesiden, ved at indsamle og rapportere oplysninger anonymt.

Marketing cookies bruges til at spore brugere på tværs af websites. Hensigten er at vise annoncer, der er relevante og engagerende for den enkelte bruger, og dermed mere værdifulde for udgivere og tredjeparts-annoncører.

Navn Udbyder Formål Udløb Type
cc_cookie_accept www.inoxpa.dk Gemmer brugerens cookie-samtykke-tilstand for det aktuelle domæne. 1 dag HTTP
PHPSESSID www.inoxpa.dk Bevarer brugersessionstilstand på tværs af sideanmodninger. Session HTTP
collect Google Used to send data to Google Analytics about the visitor's device and behavior. Tracks the visitor across devices and marketing channels. Session Pixel
_ga Google Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 2 år HTTP
_ga_# www.inoxpa.dk Anvendes af Google Analytics til at indsamle data om antallet af gange en bruger har besøgt hjemmesiden samt datoer for første og seneste besøg. 2 år HTTP
_gat_ Google Anvendes af Google Analytics til at drosle hastigheden på antallet af forespørgsler til serveren 1 dag HTTP
_gid Google Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 1 dag HTTP
fr Facebook Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 3 måneder HTTP
_fbp Facebook Registrerer et unikt ID, der anvendes til at føre statistik over hvordan den besøgende bruger hjemmesiden. 3 måneder HTTP
IDE Google Anvendes af Google DoubleClick til at registrere og rapportere om hjemmesidebrugerens handlinger efter at have set eller klikket på en af annoncørens annoncer. Formålet er at måle effekten af en annonce samt at målrette annoncer til brugeren. 1 dag HTTP
ads/ga-audiences Google Anvendes af Google AdWords til at gentage annoncer for besøgende, der sandsynligvis vil konvertere til kunder baseret på den besøgendes onlineadfærd på tværs af websteder. Session Pixel
VISITOR_INFO1_LIVE YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video 179 dage HTTP
YSC YouTube Registrerer et unikt ID for at føre statistik over hvilke videoer fra YouTube brugeren har set. Session HTTP
yt-remote-cast-installed YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-connected-devices YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Vedholdende HTML
yt-remote-device-id YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Vedholdende HTML
yt-remote-fast-check-period YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-session-app YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-session-app YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
yt-remote-session-name YouTube Gemmer brugerens video-afspiller-præferencer ved afspilning af en indlejret YouTube video. Session HTML
Cookies er små tekstfiler, der kan bruges af websteder for at gøre brugerens oplevelse mere effektiv. Loven siger, at vi kan gemme cookies på din enhed, hvis de er strengt nødvendige for driften af ​​dette websted. For alle andre typer cookies har vi brug for din tilladelse. Dette websted bruger forskellige typer cookies. Nogle cookies placeres af tredjepartstjenester, der vises på vores sider. Du kan når som helst ændre eller trække dit samtykke fra cookiedeklarationen på vores websted. Lær mere om, hvem vi er, hvordan du kan kontakte os, og hvordan vi behandler personoplysninger i vores fortrolighedspolitik. Angiv dit samtykke-id og dato, når du kontakter os angående dit samtykke.